Chris CWs Celica T-Sport

Cheers lads

Well not much to report, weathers been too crap to do anything major! Got a front tow eye to fit, but not tackline that just yet.

Also got some Kevlar SEK693 speakers for crimbo, fitted them and they sounded sweet! (Started to get earache actually <!-- s:? --><img src="{SMILIES_PATH}/icon_e_confused.gif" alt="" title="Confused" /><!-- s:? -->)




However, they looked naff where they were (fitted in boxes attached to the back of the sub), so I might go alittle drastic and fit them to the back (inside) of the seats! Anyone got recommendations for cutting metal? I made do without a metal cutter last time doing the meganes metal parcel shelf and it was messy!

Managed to get my new custom 3 point rear strut brace from RT-Performance fitted, based on the C-One design with some tweaks. Did it all in the dark, so took acouple of nights! Still need to tidy all the wiring up as I shifted the amplifiers to the back of the sub... strangely it sounds better so Im not sure what Ive done there! Must of secure the wires better



^ Not sure Ive showed/mentioned the 2 x 2 farad power caps either I fitted in the rear tray?

Oh and a quick snap I took on Andys camera and then edited (my FB profile pic atm):





Anyway, next plans are to continue saving, still after the Greddy front lip but its going to cost a fair chunk (£400+ to import, but might go for a local replica), its the only design I like though really. Will look pretty much like this as Im smoothing the badge out too:




Then want to do something to the back aswell, was going to go for a TRD rear lip but instead I might get in on some TRD rear spats like below (its basically the TRD lip with no centre piece, bit of a diffuser look) - these are photoshops as its a new design in the making:





Other than black wheels and bigger spacers thats pretty much the plan before/during the summer!

Nah I meant full bodykits <!-- s:lol: --><img src="{SMILIES_PATH}/icon_lol.gif" alt="" title="Laughing" /><!-- s:lol: --> The meganes brackets etc were useless, tore through the FG, so the bumper was coming away at the edges! Then went through a large puddle and ripped the bottom of the rear bumper in half <!-- s:? --><img src="{SMILIES_PATH}/icon_e_confused.gif" alt="" title="Confused" /><!-- s:? --> Things like that, so Im just adding to the standard bumpers as their solid, and all these bits Im looking at are reinforced FG or PU so should take the bumps

Maybe Im too rough with the car!

Cheers Meganeguy, cheating by editing it but what the hell lol

Just got the car back from Kenilworth Autobodies, really chuffed with the work again! All set ready for the front lip will should be here in about a month

So for now, just had them respray the front bumper and debadged it, then I removed the T-sport badge off the bootlid too (no pin holes!)

Heres some quick pics: